Product name: PS4 Dual Charger

1. Product introduction:

The PS4 controller dual charger is a product designed according to the charging requirements of the PS4 controller. This product can charge two PS4 controllers at the same time. Through the groove at the bottom of the product, you can see the lighting status of the PS4 controller charging lamp more intuitively The DC5V / 1A input voltage makes it easier to obtain power from the USB interface of the PS4 host or other USB adapters of 5V / 1A or higher, without the need to use the PS4 host or dedicate a dedicated power supply. The product has a novel and lightweight appearance, and is simple, convenient and practical to use. It is a must for PS4 gamers.

2. Instructions for use:

1. Insert the USB plug of the charging cable configured in the product into the USB socket of the PS4 host or other standard DC5V / 1A power adapter. The MICRO male plug of the charging cable is inserted into the MICRO female socket of the product’s charging base to start giving its products. powered by.

2. Install the PS4 handle upside down on the product, so that the MICRO interface is inserted into the product’s charging slot in the correct way to charge it, and it can also charge two PS4 handles at the same time. The charging status of the handle indicator light can be mapped in the charging groove of the product. When the charging light of the handle is displayed, it indicates that the product is charging the battery pack.

3. The PS4 handle is fully charged and the charging indicator of the handle is off. There is no light mapping display in the charging groove, indicating that the handle is fully charged.

4. The PS4 controller can control the charging state by itself. The battery will be automatically charged when the battery is full, and the power will be automatically cut off after being fully charged.

3. Technical parameters

1. Scope of application: suitable for original PS4 handle

2. Input voltage: DC5V

3. Charging current: 500 mA * 2 groups

4. Product material: ABS material.

5. Wire size: USB cable is 80cm long.

6. Product size: MM

7. Product weight: g

8. Product accessories: 1 charging stand and 1 charging cable.

9. Packing method:

4. Matters needing attention:

1. The input power supply must be a stable DC5V standard voltage; when charging with a single handle, the output current of the power supply needs to be ≥500mA; when using two handles to charge simultaneously, the output current needs to be ≥1000mA;

2. If the product is damaged, please stop using it and send it to a professional for repair. Do not disassemble it by yourself.

3. If there is water, please dry it by air, and do not expose this product to the sun.

4. Do not wipe this product with chemical reagents.

5. Do not scratch the product with sharp objects.